#ACEKARD 2I SETUP NOT WORKING INSTALL#
#ACEKARD 2I SETUP NOT WORKING UPDATE#
#ACEKARD 2I SETUP NOT WORKING MANUAL#
#ACEKARD 2I SETUP NOT WORKING UPGRADE#

As there is no way to flash the bootloader update to the AK2i with out a DS system, the AK2i must be updated before the system firmware. If you can not boot your Flash Kit then you can not run the AK2i bootloader update file. NDS file and must be run from a compatible Flash Kit on one of the 4 previously mentioned systems. The AK2i bootloader update can only be performed using a DS Phat/DS Lite, or by using a DSi/3DS with a firmware version less than the AK2i bootloader exploit to be applied.

#ACEKARD 2I SETUP NOT WORKING UPGRADE#

Until access to the private key or a fully functionally DSi exploit is found, a DSi firmware upgrade is permanent. While the Public DSi-key was found it only allows for the decryption of things like DSi-Ware. Users, who wish to purchase DSi-Ware/eShop files, transfer DSi-Ware, or use the Web browser, should upgrade their system firmware knowing that it can never be downgraded.

#ACEKARD 2I SETUP NOT WORKING MANUAL#

Please see the Nintendo DSi Operations Manual for help troubleshooting. Press and hold the Power Button to turn the system off. When an AK2i does not contain the proper update the following error message will be displayed when attempting to boot the 2i:ДЄn error has occurred. Be advised that the AK2i HWID 81 Flash Kit can not operate on a 3DS running any firmware revision after 4.3.0-10. As a result of the 3DS update almost all Flash Kits have been permanently blocked.

These kits were unable to release an update, and so far it appears that the AK2i is among them. Many kits have a proper save IC but this information is burned into an area of the chip which is not rewritable by the end-consumer. The 3DS firmware v4.4.0-10 added a new feature which blocked Flash Kits based on their save IC. Currently there is no AK2i HWID 44 DSi v1.4.3+ firmware solution nor is there a solution for the 3DS v2.1+ firmware updates. The HWID 44 PCB uses an older design with less bootloader space, which can not be as easily updated. For the most part, this older method has worked, that was until users began to notice the differences between the AK2i HWID 44 and 81 Flash Kits. AcekardвЂ™s older exploit method has forced users to wait for fully functional ROM data updates, which are pulled from a limited pool of known exploitable files. More modern вЂњgeneration 3вЂќ Flash Kit designs (SCDS2, iEVO, iSmart MM) require only an actual ROM icon to bypass the first check and spoof the secondary check with an updatable data file. The flashable bootloader of the 2i is not unlike вЂњgeneration 3вЂќ Flash Kits, but requires actual ROM data to circumvent the DSi icon check and secondary data response check. Team Acekard uses an older вЂњgeneration 2вЂќ Flash Kit design, which is currently not the most ideal hardware for DSi/3DS bootloader exploits. Updating, blocking, and re-flashing are inevitable processes of this hobby, thankfully the Acekard 2i continues to function on the DSi v1.4.4 and lower and on the 3DS v4.3 and lower.

#ACEKARD 2I SETUP NOT WORKING INSTALL#

While each update has been optional, you must install the firmware update if you wish to use the DSi Browser or DSi Shop (IE: purchase/download DSi-Ware). Each revision claimed to add background fixes to improve performance while secretly removing Flash Kit functionality.

Acekard 2i setup not working